DRIVETECH 4x4 MAZDA BT50 09/2011 - 08/2015

Specific model 6 Speed auto transmission oil cooler kit 13868000 including Thermal Bypass valve

( Please ensure you exact model vehicle is listed below for this seal to be a perfect fit)
 
Part No. 13868000 - COOLER KIT BT50 + STL009 Bypass valve
Type:   Trans Cooler / Model Specific
Brand : Drivetech 4x4 Genuine Part
Unit of Measure:  EACH
 
Description
Improve cooling efficiency of the transmission during towing, four wheel drive incline driving, prolonged highway driving, and stop / start traffic
Protect transmission components such as friction material, electronic components, planetary gearing and valve body systems
Are constructed using lightweight aluminium alloy for maximum corrosion and stone resistance
Have a fluxless, oven brazed construction with burst pressure in excess of 400psi
Have multiple oil flow paths for maximum cooling efficiency
The range includes Universal and "Vehicle-Specific Kits" or "Universal Kits"
This Particular model is Specificly for the Vehicles listed below.
 
MAZDA BT-50 B22P UP 2.2L P4AT MZ-CD DOHC 16v Turbo Diesel Direct Inj. 4cyl 110kW 6sp Auto 2dr Cab Chassis & Pickup RWD [09/11 - 08/15] AUTOMATIC TRANSMISSION COOLER KIT
MAZDA BT-50 B32P UP 3.2L P5AT MZ-CD DOHC 20v Turbo Diesel Direct Inj. 5cyl 147kW 6sp Auto 4dr Cab Chassis & Pickup RWD [09/11 - 08/15] AUTOMATIC TRANSMISSION COOLER KIT
 
UNIT Vehicle Specific Oil Cooler Kits AUTOMATIC TRANSMISSION COOLER KIT 1 Includes Ford Ranger PX, Mazda BT-50 B22P, B32P RWD 09/11/0515
146High x 280Wide x 38Thick
 

The vehicle specific kits have:

  • Hose Barb 9.50mm
  • Stacked Plate Construction
  • Easy to follow instructions
  • Model specific mounting brackets
  • Complete installation hardware included
  • In Series or Bypass Configuration choices
  • Vehicle-Specific Cooler Kits

____________________________________________________

DRIVETECH 4x4 Ford Auto Trans 6R80 6sp Mechatronic 6R80 THERMAL CONTROL BYPASS VALVE

Suits 6 Speed auto transmission oil cooler kit 13868000 when Bypassing the Thermo control valve

 
Part No. STL009 - Bypass
Type:   Model Specific
Brand : Drivetech 4x4 Genuine Part
Unit of Measure:  EACH
 
The factory designed valve is prone to becoming stuck in the closed position blocking of any cooler flow.
The transmission temp fluid sensor will not signal until past the danger point of 130c.and generally the valve becomes stuck due to contamination in the oil due to worn bushings and torque convertor problems.

This commonly leads to major transmission failure because of no lubricartion

To solve this problem a full-time lube cooler valve STL009 can be fitted into the Transmission whilst servicing the valve body.
Valve body removal is required so the may need to be done by a professional depending of yor mechanical ability.
After installation the full-time lube, average operating temperatures are typically maintained around 70c - 90c even under working conditions
  

Improve cooling efficiency of the transmission during towing, four wheel drive incline driving, prolonged highway driving, and stop / start traffic
Protect transmission components such as friction material, electronic components, planetary gearing and valve body system

Description

  • Greater Transmission life
  • Full time cooler flow with much lower average fluid temperature
  • Built in high pressure safety bypass into the lube circuit
  • Immediate and accurate fluid level check without warm-up cycle, which saves tech time for re-racking and rechecking. (45 min. average)
  • Easy install, drop in replacement…can be done in-car when servicing the valve body.

This Particular model is Specificly for the Transmission listed below.

 

Ford Automatic Transmission 6R80 6sp Mechatronic
RWD SUPERIOR VALVE BODY COMPONENTS 1 Allows fulltime cooler flow with lower average fluid temperature. Saves time when servicng Transmission by allowing immediate fluid level check without warm up cycle.
 
Ford 6R60/6R75/6R80 units fits all 6R60 Explorer/6R75 Expedition/Navigator/6R80 Mustang/F150 2006-2016
 
Drivetech 4x4 Vehicle Specific Kits Available
Ford Ranger PX 2011-On Bypass 13868000
Mazda BT-50 UP/UR 2011-On Bypass 13868000
Toyota Prado KDJ/KZJ120 2006-2009 Series 13865825
Toyota Prado KDJ150 2009-2015 Bypass 13865850
Toyota Prado GDJ150 2015-On Bypass 13865850
Toyota Hilux GUN126/136 2015-On Series/Bypass 13865350
Toyota Hilux KUN26 2005-2013 Series/Bypass 13865325
 

(13868000-STL009_BT50_OZ)

SKU 13868000-STL009_BT50_OZ
Brand Drivetech 4x4
Shipping Weight 5.0000kg
Shipping Width 0.150m
Shipping Height 0.500m
Shipping Length 0.150m
Shipping Cubic 0.011250000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Go Kanga users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category